Zu Inhalt springen

Stoßstangenmontage-Schieberhalterung – LC6250E11 / NC1050E11B

Artikelnummer: FCP-0548-MA1

• Starkes OE-Äquivalentteil

• Inklusive Schaumstoff-Dichtungsscheibe

Ursprünglicher Preis £0
Ursprünglicher Preis £4.89 - Ursprünglicher Preis £14.89
Ursprünglicher Preis
Aktueller Preis £4.89
£4.89 - £14.89
Aktueller Preis £4.89
Titel: 10 Stück
Dieser einzigartige Clip mit rundem Kopf wird bei mehreren Modellen verwendet, darunter bei einigen Versionen des MX-5, dem Ford Maverick und dem Mazda MPV. Der Clip wird in der Karosserie befestigt und der Stoßfänger gleitet über und um den glatten runden Kopf des Clips. Die Clips werden komplett mit Schaumstoff-Dichtungsscheiben geliefert.

Mazda-Teilenummer: NC1050E11B

Farbe: Weiß

Befestigungselement für hintere Stoßstange und Verkleidung

Sie können auch mögen

Mazda MX-5 Stoßstangenklammern vorne und hinten, Mazda BF6750033

Ursprünglicher Preis £4.79 - Ursprünglicher Preis £13.69
Ursprünglicher Preis
£4.79 - £13.69
£4.79 - £13.69
Aktueller Preis £4.79

Diese grauen Verschlüsse haben einen großen rechteckigen Kragen. Sie passen in ein 10-mm-Loch und dehnen sich aus, wenn der Mittelstift eingeführt ...

Vollständige Details anzeigen
Ursprünglicher Preis £4.79 - Ursprünglicher Preis £13.69
Ursprünglicher Preis
£4.79 - £13.69
£4.79 - £13.69
Aktueller Preis £4.79

Kunststoff-Knopfklammern für Gummi-Dichtungsstreifen, Mazda J00156741

Ursprünglicher Preis £4.69 - Ursprünglicher Preis £12.69
Ursprünglicher Preis
£4.69 - £12.69
£4.69 - £12.69
Aktueller Preis £4.69

Dieser Clip wird von Mazda zur Befestigung der Gummidichtung verwendet, die an der Vorder- oder Rückseite der Motorhaube verläuft. Es wird in den m...

Vollständige Details anzeigen
Ursprünglicher Preis £4.69 - Ursprünglicher Preis £12.69
Ursprünglicher Preis
£4.69 - £12.69
£4.69 - £12.69
Aktueller Preis £4.69

Unterboden-, Stoßstangen- und Radkasten-Schraubtülle, Mazda B45556135

Ursprünglicher Preis £4.59 - Ursprünglicher Preis £11.99
Ursprünglicher Preis
£4.59 - £11.99
£4.59 - £11.99
Aktueller Preis £4.59

Diese grauen Kunststoffklammern werden manchmal auch als Schornsteinmuttern oder Turmklammern bezeichnet und werden zum Verbinden von Zierleisten u...

Vollständige Details anzeigen
Ursprünglicher Preis £4.59 - Ursprünglicher Preis £11.99
Ursprünglicher Preis
£4.59 - £11.99
£4.59 - £11.99
Aktueller Preis £4.59

Schraubbefestigungsclips für Stoßstangen und Unterböden, Mazda C27450133

Ursprünglicher Preis £4.69 - Ursprünglicher Preis £13.29
Ursprünglicher Preis
£4.69 - £13.29
£4.69 - £13.29
Aktueller Preis £4.69

Diese grauen Schraubkantentüllen oder Turmklammern werden zum Verbinden von Teilen verwendet, ohne dass die Metallkarosserie beschädigt werden muss...

Vollständige Details anzeigen
Ursprünglicher Preis £4.69 - Ursprünglicher Preis £13.29
Ursprünglicher Preis
£4.69 - £13.29
£4.69 - £13.29
Aktueller Preis £4.69

8-mm-Kopf-M5-Karosserieschraube für Stoßstangen und Bögen, Mazda 9CF600516B

Ursprünglicher Preis £4.49 - Ursprünglicher Preis £12.39
Ursprünglicher Preis
£4.49 - £12.39
£4.49 - £12.39
Aktueller Preis £4.49

Diese Schrauben werden bei mehreren Mazda-Modellen zur Befestigung von Stoßstangen, Kühlerverkleidungen und Radlaufverkleidungen verwendet. Jedes e...

Vollständige Details anzeigen
Ursprünglicher Preis £4.49 - Ursprünglicher Preis £12.39
Ursprünglicher Preis
£4.49 - £12.39
£4.49 - £12.39
Aktueller Preis £4.49
vehicleclips.co.uk
4.9
771 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.