Zu Inhalt springen

BMW 8 mm Kunststoffnieten-Zierklammern – für Stoßstangen, Schweller, Kofferraumauskleidung und Zierleisten – 51127004445

Artikelnummer: FCP-0339-BM1

• Einfache 8-mm-Kunststoffniete

• Wird für Innen- und Außenverkleidungen verwendet

• Erhältlich in Großpackungen

Ursprünglicher Preis £0
Ursprünglicher Preis £4.79 - Ursprünglicher Preis £15.19
Ursprünglicher Preis
Aktueller Preis £4.79
£4.79 - £15.19
Aktueller Preis £4.79
Titel: 10 Stück
Diese sind bei mehreren Modellen angebracht und werden typischerweise auf größeren Verkleidungsteilen oder Polstern wie Stoßstangen, Seitenschwellern und Kofferraumauskleidungen verwendet. Der Clip ist eine sehr einfache, aufsteckbare Kunststoffniete, die sich ausdehnt und festhält, wenn der Mittelstift durchgesteckt wird.

BMW Teilenummer: 51127004445

Lochgröße: 8 mm

Farbe: Schwarz

Kofferraumteppich und Innenverkleidung, vordere Stoßstange und Verkleidungsbefestigung, hintere Stoßstange und Verkleidungsbefestigung

Sie können auch mögen

BMW 8 mm Kunststoffklammern/Nieten – Innenverkleidung, Teppich und Verkleidung 51471911992

Ursprünglicher Preis £4.69 - Ursprünglicher Preis £13.09
Ursprünglicher Preis
£4.69 - £13.09
£4.69 - £13.09
Aktueller Preis £4.69

Diese im gesamten BMW-Sortiment weit verbreiteten Nieten sind sehr einfache Druckstift-Kunststoffnieten, die in ein 8-mm-Loch passen. BMW verwendet...

Vollständige Details anzeigen
Ursprünglicher Preis £4.69 - Ursprünglicher Preis £13.09
Ursprünglicher Preis
£4.69 - £13.09
£4.69 - £13.09
Aktueller Preis £4.69

6,5 mm Steck-Spreizniet aus Kunststoff, BMW 16136753087

Ursprünglicher Preis £4.69 - Ursprünglicher Preis £12.49
Ursprünglicher Preis
£4.69 - £12.49
£4.69 - £12.49
Aktueller Preis £4.69

Dieser kurze Spreizniet passt in ein 6,5-mm-Loch. Sie werden von BMW typischerweise für Leichtbauteile wie Windschutzscheibenverkleidung, Schweller...

Vollständige Details anzeigen
Ursprünglicher Preis £4.69 - Ursprünglicher Preis £12.49
Ursprünglicher Preis
£4.69 - £12.49
£4.69 - £12.49
Aktueller Preis £4.69

BMW Innen-Kunststoffklammern für Zierleisten an Schweller und Türeinstieg – beige Klammern

Ursprünglicher Preis £4.89 - Ursprünglicher Preis £16.09
Ursprünglicher Preis
£4.89 - £16.09
£4.89 - £16.09
Aktueller Preis £4.89

Türschweller-Einstiegsplatten-Clips, die bei vielen verschiedenen BMW-Modellen verwendet werden, einschließlich neu erschienener Versionen. Die Cli...

Vollständige Details anzeigen
Ursprünglicher Preis £4.89 - Ursprünglicher Preis £16.09
Ursprünglicher Preis
£4.89 - £16.09
£4.89 - £16.09
Aktueller Preis £4.89

Innen- und Außenverkleidungsclip für Heckklappe und Kofferraumklappe, BMW 51137065607

Ursprünglicher Preis £4.79 - Ursprünglicher Preis £13.69
Ursprünglicher Preis
£4.79 - £13.69
£4.79 - £13.69
Aktueller Preis £4.79

Dieser markante Clip wird bei verschiedenen BMW-Fahrzeugen verwendet, von der 3er-Serie E9* bis zur 7er-Serie E65. Die Verwendung hängt vom Modell ...

Vollständige Details anzeigen
Ursprünglicher Preis £4.79 - Ursprünglicher Preis £13.69
Ursprünglicher Preis
£4.79 - £13.69
£4.79 - £13.69
Aktueller Preis £4.79

BMW 5 mm Spreiznietklammern aus Kunststoff – 51478166992

Ursprünglicher Preis £4.59 - Ursprünglicher Preis £11.99
Ursprünglicher Preis
£4.59 - £11.99
£4.59 - £11.99
Aktueller Preis £4.59

Diese werden bei einigen älteren 3er- und 5er-BMW-Modellen wie dem E36 und dem E39 verwendet. Es handelt sich um eine standardmäßige 5-mm-Push-Pin-...

Vollständige Details anzeigen
Ursprünglicher Preis £4.59 - Ursprünglicher Preis £11.99
Ursprünglicher Preis
£4.59 - £11.99
£4.59 - £11.99
Aktueller Preis £4.59
vehicleclips.co.uk
4.9
782 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more