Neue Produkte

These clips fit onto the underside of many modern Toyota vehicles- normally on the sidekirts or sill covers.

This black plastic fir tree clip is the type used by Subaru to attach the under bonnet insulation to most of their modern vehicles.

Used to secure trim on parts such as bumpers, door cards and grilles.

This metal part is used to secure trim. They are common on bumpers and grilles.

These push fit plastic buttons click into position and fasten the windscreen cowl and engine shields into position. This type is used on several Ho...

These clips are used to secure the side skirt, sill cover or rocker moulding onto some Volvo models including the V40, S60 and V60.

A black plastic fastener used for positioning and mounting the door card on some modern Skoda cars.

This clip is used on most Audi door cards to help position and mount the panel into position. Most door cards just use a single one of these clips ...

These black plastic fasteners are used to help position and mount the door cards on most Cupra cars. Each door card typically uses a single clip.

These black plastic clips are located on the inside of the door cards and are used to position and secure the door card. They are used on most mode...

These black plastic fasteners are used to help position and mount the door cards on most modern Volkswagen cars. Most door cards just use a single ...

These small blue plastic clips are used to secure trim- normally around the front bumper and front grille.

These small blue clips are used to secure the trim and mouldings normally on and around the front bumpers. They are used on several different Toyot...

This is a 6mm push fit plastic trim clip. The rivet expands when fitted and is used for trim, mouldings and shields. They are used on the exterior ...

This plastic trim clip is distinctive in that the push pin is grey and the collar is black. Toyota use these for parts such as underbody shields, b...

Widely used across the Lexus range and for a variety of purposes, this push fit plastic trim clip fits into a 7mm hole.

These push fit plastic clips are used to suspend the parcel shelf from the boot hatch. The small clip pushes into the trim on the boot hatch either...

This two-part clip is used on some Lexus models including the IS. The clip is used to attach the windscreen cowl to the vehicle.

This two piece clip used used on some Toyota models including some versions of the MR2. The clip is used to secure the exterior side air intakes on...

This is a standard plastic fastener that corresponds to Nissan part number 90825JD00A. This clip is used to attach the trim to the outside of the b...

A black plastic push nut used on many modern Kia vehicles to secure the arch linings into position. The nut is not threaded but instead has barbs t...

These black plastic nuts push onto a 5mm diameter stud in the wheel arch. They are used on the front and rear arches of several Hyundai models.

This is a two-part fastener that locks into and expands its grommet when pushed into the bodywork. The clip is used by Honda to secure the rear spo...

These long white plastic trim clips are used on some models of the Jeep Wrangler to attach the external trim that runs around the edge of the wheel...

These clips have a distinctive sprung head to reduce vibrations. The fastener is designed to compress and expand when fitted so may appear smaller ...

This yellow plastic clip is used to secure the bonnet support when not in use.

These grey plastic trim clips with a black rubber seal are used on many modern Volkswagen cars. The clip is used to attach parts such as wheel arch...

This clip is used on many different Nissan models. The plastic fastener is normally used on and around the headlining of Nissan cars and vans.

These clips are used the attach the exterior sliding door rail cover trim. The clips often break if the cover is removed.

This black plastic trim clips are used to secure parts such as underbody trim and shields.

These distinctive blue plastic clips have a curved head and are used to attach exterior trim panels to the bodywork. Example fitments include the T...

These small fir tree clips are used on some older Mitsubishi models typically around the windscreen cowl, scuttle panel and air intakes.