Produkte

This is one of the most common sizes of screw used by Audi for the wheel arch linings on their vehicles.

These bodywork screws are used to attach body parts as well and underbody shields, covers and linings.

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

These screws are common on Toyota cars and vans. The screws are often used on the wheel arch linings or splashguards. The screws have a captive was...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

These steel screws are used to secure parts such as arch linings, splashguards, undertrays and other shields.

This M6 bolt is used to attach interior trim and linings on some SEAT models including the Arona and the Ibiza Mk5.

These black metal screws are used on several Renault models. They are normally found securing parts such as bumpers, wheel arch linings, engine bay...

These small metal clips are used to locate and keep the brake hose in position on some older VW cars and vans.

A very common screw / bolt used by BMW to secure parts such as bumpers, undertrays and arch linings.

This is a common fastener used around the dashboard and centre console of many modern VW cars and vans. The screw is an M5 thread.

Small black metal clips which are used to secure the trim strips onto the door cards on some modern Audi cars.

These small black metal clips are used to secure trim strips to the door cards on several VW models.

These edge nuts are used to attach parts such as engine undertrays, bumpers, splashguards and interior trim on Honda cars as well as fairings and c...

Thisis by far the most common sump plug washer used by Honda for it's range of cars and fits most of their car range from the 1980s onwards.

These black metal screws are used to attach the engine undertray to most modern Kia vehicles. The screws are heavy duty and unlikely to break but t...

Black metal screws used on many different Hyundai vehicles to secure the engine undertray in position.

These metal fasteners are used on the undertray and other underbody access shields to secure the panels in place. They lock and are released with a...

These metal fasteners are used on the undertray and other underbody access shields to secure the panels in place. They lock and are released with a...

These metal fasteners are used on the undertray and other underbody access shields to secure the panels in place. They lock and are released with a...

These small screws have a soft plastic sealing washer pre-fitted. The screws are used for securing exterior trim such as door mouldings, sill cover...

These metal clips are used on the inside door pull handle to attach the trim cover. They are used on most modern VW cars.

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

This a very common screw used across the VW group. They are normally used on interior trim around the dashboard, centre console, boot and doors. Th...

This type of clip is often used on interior pillar covers. The clip fits onto a lug on the trim panel and then pushes into a hole in the metal body...

These small metal spirng clips are often used on the interior pillars or for other interior trim panels around the vehicle. The metal spring clip i...

These metal spring clips are a common part used on Mercedes cars and commercial vehicles. The clips are used to attach trim panels such as interior...

The metal snap fit clips are normally used on pillar trim covers, fascia panels and other small trim pieces.

These metal spring clips are used to attach interior trim panels on several different Ford car and van models.

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

A very common 16mm long black metal spring clip used for attaching fascias, pillar covers and interior trims. The fastener is common on a wide rang...

These are a very common screw for the interior of Audi cars.

This is an extremely common screw on the interiors of Skoda cars. They are typically used for boot linings, door cards, sill covers, pillars and ta...

This small M5 screw is used to secure dashboard parts and also the front bumper on several different Skoda cars.

This bolt is common on interior panels around the boot and tailgate as well as on the bumper of some models.

These 30mm long bolts are used by VW on the front bumpers and radiator support of several models.

These M6 nuts are normally used along the underside of the bumper or sill to attach undertrays or trims.