Produkte

These black plastic clips are used to hold shields, panels and covers in place for wheel arches and underbody trims.

These black trim clisp are used on the exterior trims of some Kia models such as the Niro. The clips are used to secure the side moulding strips on...

These heavy duty push fit plastic clips are used on the underside of the vehicle to secure the sill covers or side skirts into position.

These black clips are used on the latest model of Ford Kuga (2020 onwards) to attach the side skirts or sill cover mouldings.

These black clips are used the attach the trim cover to the sliding door rail on the outside of the Transit Custom and Tourneo from 2012 to 2023.

This small screw is used on interior trim panels around the centre console as well as for the charging point surround on most electric VW vehicles.

Interior trim clips used on several VAG group vehicles to attach parts such as tailgate liners, pillar covers and boot linings.

These sprung head push fit trim clips are used on all versions of the Tesla Model 3 to attach the door cards. The clips push in and expand when fit...

This part is often used by VW on wheel arch linings, bumpers and wings. The plastic nut has a 22mm collar.

This is a common screw used on body parts and trim such as wheel arch linings and bumpers.

This is a plastic insert clip with a rubber grommet. The clip is used on some Tesla models such as the Model 3. They are used in and about the fron...

These unusually short black plastic trim clips fit into an 8mm hole and are used to attach trim mouldings and panels in position on several Mercede...

These twin access clips will hold hose diameters between 4 and 6mm. The clips fit into a 6.5mm hole.

High quality, aftermarket equivalent to BMW part number 51718212148. These twist lock bolts are normally used on parts such as engine undertrays.

These parts are a very high quality aftermarket equivalent to the genuine Audi part with number 8K0805121. The bolts are normally used on engine un...

These twist lock hook clips are normally used on access panels. A common use is on the bumpers of Jaguar cars and SUVs where the tow eye is hidden ...

This two-part door card clip is very common on Volvo cars. The clip is used to attach the front or rear door trim card into place.

These plastic spacers / washers are used with metal clamps to secure underbody shields into position. They are very common across the VW group.

These plastic washers are fitted to the underside of several modern Skoda vehicles where heat shields are held on by metal star washers. The plasti...

These plastic spacers / washers are used with metal clamps to secure underbody shields into position. They are very common across the VW group.

These are used on the engine undertray and underbody shields of several Skoda models including the Superb.

A metal screw with 18mm washer that is used for securing parts such as engine undertrays, splashguards and wheel arch liners.

These black brackets can be used to mount trim panels onto vehicle bodywork and keep the fixings hidden.

These are a very common interior trim panel screw used on a wide range of SEAT cars. Typical uses include around the doors, centre console, dashboa...

These small black plastic trim clips are used on the VW T5 and T6 to attach the surround to the sliding door interior handle. There are two clips u...

These arrowhead plastic clips are used to secure rubber seal in position. There are commonly used on the windscreen cowl and some door seals.

A push fit plastic clip that is used to secure the weatherstrip in position on some older Audi vehicles.

These clips are often used on the wheel arch linings of Lexus cars. The clip clicks into a square hole and locks in position but its design also th...

A common metal screw used by Audi and normally fitted on wheel arch linings, splash guards and bumpers.

A common fir tree clip used by Fiat on their cars and vans. The clip fits into an 8mm hole. A typical use is to hold the wheel arch lining or splas...

These plastic nuts are used by Fiat and Alfa Romeo. They are not threaded but have sprung tabs inside which attach onto a weld stud or threaded bar...

These black plastic clips are normally used to secure wheel arch liners or underbody shields. The parts fit onto studs mounted on the body.

These body screws have a captive washer and are normally used on parts such as underbody shields, wheel arch linings and to fasten body panels into...

These plastic nuts are used on some Land Rover vehicles to hold the splashguards or wheel arch linings in position. The 10mm nuts are unthreaded an...

Large headed fir tree clips that are used to hold the splash shields or wheel arch linings in place on several Nissan models. The clips have a 35mm...

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...

These black metal screws are the most common size used by Honda to secure wheel arch linings and splashguards. The screws are high quality parts id...

These metal screws are used on some Porsche models for securing the wheel arch linings, mudguards and under body shields into position.