Produkte

White plastic hidden trim clip, equivalent to Kia 87758D2000. Used to secure side skirt and sill moulding cover trim panels. Available in multiple ...

These clips fit into the bodywork and provide a mounting place for a screw to be inserted. They are normally used for side mouldings or sill covers.

These small yellow, p-shaped screw grommets or locknuts are common on modern Audi cars and normally used around the bumpers and wheel arches.

These clips fit into the tailgate either side of the rear window. The parcel shelf string attaches to this clip and then the shelf lifts when the b...

These push fit plastic clips are used to suspend the parcel shelf from the boot hatch. The small clip pushes into the trim on the boot hatch either...

These parcel shelf clips are used on modern Nissan models including some versions of the Note and Qashqai. The clip fits into a hole in the tailgat...

These clips fit into the tailgate either side of the rear window. The parcel shelf string attaches to this clip and then the shelf lifts when the b...

These push in clips are fitted to the tailgate. The parcel shelf string attaches to these clips so that when the boot is opened, the parcel shelf l...

These white plastic trim panel clips are used to attach the trim panel that sits in the centre of the passenger side of the dashboard. They are use...

Used in a wide variety of location from bumpers, to arch linings and upholstery. This black plastic blind rivet fits into a 6mm hole.

These small plastic clips click into a 5mm diameter hole. The clips are used to secure lightweight parts such as air intake hoses, engine bay shiel...

This is a standard plastic fastener that corresponds to Nissan part number 90825JD00A. This clip is used to attach the trim to the outside of the b...

Black plastic fir tree clip equivalent to Renault part number 7703077090. Fir tree clips are used to secure trim panels, linings and other interior...

A standard plastic fir tree clips that fits into a 7mm hole. These clips are used to secure interior trim panels such as boot linings and interior ...

Black plastic fir tree clip that pushes into a 7mm hole and locks in place to secure interior linings and carpets. The fir tree profile compresses ...

Used on several models for securing trim covers, mouldings and control units.

These small screw grommets or lock nuts are used to attach small trim pieces or control parts onto the bodywork of the vehicle.

These are a standard hidden trim clip. The parts slide onto the back of trim and then are inserted into a hole int he bodywork. This clip is used b...

A black plastic nut used as a stud fastener for securing trim panels and components. The nut is made from plastic and pushes onto a stud to hold pa...

A black plastic nut with a 22mm collar, equivalent to Alfa Romeo 50504884. Used to secure wheel arch linings, mudguards and underbody panels.Fitmen...

Black plastic nut with a 22mm collar, equivalent to Audi WHT003207. Used across a wide range of Audi models to secure wheel arch linings, mudguards...

A black plastic nut with a 22mm collar, equivalent to Fiat part number 50504884. This type of fastener is commonly used to secure underbody insulat...

This black plastic nut with a 22mm collar is used to secure underbody and arch lining panels in position. The OE part number is Jeep 50504884.Fitme...

These distinctive clips are used on some Volvo models to attach the side skirts or sill trims. The clip fits into an 11mm hole and expands when the...

Dieser 8-mm-Clip lässt sich sehr schnell und einfach installieren und entfernen. Sie werden häufig für Verkleidungen verwendet, bei denen ein Zugan...

This part is used on several Fiat models to attach and secure the plastic cowl at the base of the windscreen. The clips push to fit and each one in...

White and black plastic screw grommet with a rubber gasket. The head diameter is 20.0mm and the grommet fits into a 10x10mm square hole. It is equi...

Used on several Fiat models for mounting parts such as wheel arch linings, engine bay trims, tailgate trims and interior panels.

Small white plastic clips used for securing external trim mouldings into position on some modern Jaguar cars.

Plastic trim clip for securing weatherstrips and rubber seals on Lexus bonnet areas. This fastener corresponds to Lexus part 90467-08011 (904670801...

These are a standard yellow plastic trim clip used by Jaguar for some interior trim panels and mouldings. The clips slides into position on the bac...

This is a two-part clip that is only designed to come apart on disassembly. It is normally used on interior panels such as boot linings or pillar c...

This plastic nut is used on some Vauxhall models such as the Crossland X. The nut is fitted inside the wheel arch and holds the liner or splashguar...

These large headed black plastic rivet are used on large trim items such as bumper covers, sill mouldings and wheel arch linings.

These are a popular black plastic rivet that expands when fitted. They are used on many different vehicles within the Jaguar Land Rover model range.

These larger plastic rivets are used to secure parts such as engine bay shields and the scuttle panel or windscreen cowl on several modern Jaguar c...

These black plastic fit fit clips are used by VW to attach the linings to the load bay / cargo area of the new VW Transporter T7. The clips fit int...

These dark grey plastic fit fit clips are used by VW to attach the linings to the load bay / cargo area of the new VW Transporter T7. The clips fit...

These light grey plastic fit fit clips are used by VW to attach the linings to the load bay / cargo area of the new VW Transporter T7. The clips fi...

Black plastic push fit clip designed to secure interior linings, carpets and upholstery. The clip fits an 8mm hole. Equivalent to Mercedes-Benz OE ...

These push fit plastic fasteners are used on many different Volkswagen cars and vans and for a wide range of purposes. They are used on the VW Tran...

Push-fit plastic fastener for securing engine bay covers and trim panels on Lexus vehicles. Manufactured in black plastic, this retainer matches Le...

These push fit plastic rivets are used on models such as the Jaguar XF to secure the windscreen cowl at the bottom of the windshield.