Produkte

This clip fits into an 8mm hole and is used to secure parts such as undertrays, bumpers and wheel arch linings.

This plastic trim clip is distinctive in that the push pin is grey and the collar is black. Toyota use these for parts such as underbody shields, b...

These 9mm push fit plastic rivets are used for securing trim such as the windscreen cowl in position.

These distinctive trim clips are used on bumpers, shields and undertrays. They fit into a 9mm hole and have a wide 33mm collar.

These clips are designed to allow easy fitting of plywood lining. The clip allows 3-4mm ply and the screw hole diameter is 4.5mm.

These angled clips fit into the metal bodywork and allow trim panels to be screwed into position. They are common on door cards as well as tailgate...

These distinctive blue plastic clips have a curved head and are used to attach exterior trim panels to the bodywork. Example fitments include the T...

These white clips normally come apart when removed or if the trim damaged. If so, the entire clip should be replaced. These are common on exterior ...

Typically used for arch linings or bumpers and for mounting other plastic trim parts onto the metal bodywork.

These black plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply, ins...

These small push fit plastic rivets are used to secure parts such as arch linings and windscreen cowls. The clip is push to fit but can be easily r...

This black plastic fir tree clip is the type used by Subaru to attach the under bonnet insulation to most of their modern vehicles.

These small plastic button clips are used to fasten the bonnet insulation sheet to the underside of the bonnet. The plastic clips can become brittl...

Black plastic bonnet insulation clip for Lexus vehicles, used to secure bonnet insulation and hood soundproofing to the bonnet.

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

These pinch clips expand when fitted to hold the noise insulation in position on the underside of the bonnet. They are used on several modern Ford ...

These button clips are used to hold the sound insulation onto the underside of the bonnet.

These pinch-to-fit clips are used to secure the bonnet insulation on most modern Jaguar models. It's also used on some interior carpets and sound d...

Bonnet Release Cable & Wiring Clip identical to Lexus part number 90469-06005 / 9046906005. This black plastic clip secures the bonnet release ...

These clips are used to route the bonnet release cable on most modern Honda cars. The clips close around the cable and then clip into a 7mm hole.

These clips are used by Land Rover to secure the bonnet release cable through the engine bay on several of their models including the new Defender ...

These are the plastic trim clips that are used to attach the sound deadening to the underside of the bonnet on the TT9 Ford Transit made between 20...

This yellow plastic clip is used to secure the bonnet stay when not in use. They often break resulting in a loose and rattling support rod. It is a...

This yellow plastic clip is used to secure the bonnet support when not in use.

This is a common bonnet stay holder clip on Mazda vehicles. The bonnet support rod clips into this retainer when not in use. The clips can easily b...

These small black plastic trim clips are used by SEAT to attach trim covers such as the top bonnet trim to the SEAT Leon Mk2.

White plastic interior trim clip for some Toyota tailgate and boot lid linings. This replacement fastener serves as a Toyota tailgate boot lid lini...

These plastic fasteners are used to secure brake lines in position. The clip connects the brake line to the chassis. This type of clip is used on s...

This trim fastener secures bumper and grille components on the vehicle, including front bumper, rear bumper, and front grille or slam panel trim. M...

These distinctive white fasteners are used on the bumper corners to align and fasten the bumper in position.

These brown plastic lock nuts have a rubber seal built onto the clip They are used by Skoda to attach parts and trim to the bodywork.

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...

These small clips push into a 7mm hole and the fin lock the clip in place. They are typically used by Toyota for small, light trim panels such as a...

This nylon cable tie fit into a 6mm hole and can hold a maximum bundle diameter of 45mm.

These are used by Ford to attach the interior D pillar trims in the boot area of the Focus C-Max and C-Max (2003-2010).