Produkte

These self tapping screws are used by Volvo in a variety of different fitting locations but are most commonly used for securing the wheel arch lini...

High quality universal fastener for securing body panels and parts.

These black plastic clips are used to hold shields, panels and covers in place for wheel arches and underbody trims.

These black trim clisp are used on the exterior trims of some Kia models such as the Niro. The clips are used to secure the side moulding strips on...

These black clips are used on the latest model of Ford Kuga (2020 onwards) to attach the side skirts or sill cover mouldings.

These sprung head push fit trim clips are used on all versions of the Tesla Model 3 to attach the door cards. The clips push in and expand when fit...

These unusually short black plastic trim clips fit into an 8mm hole and are used to attach trim mouldings and panels in position on several Mercede...

These twin access clips will hold hose diameters between 4 and 6mm. The clips fit into a 6.5mm hole.

High quality, aftermarket equivalent to BMW part number 51718212148. These twist lock bolts are normally used on parts such as engine undertrays.

These parts are a very high quality aftermarket equivalent to the genuine Audi part with number 8K0805121. The bolts are normally used on engine un...

These twist lock hook clips are normally used on access panels. A common use is on the bumpers of Jaguar cars and SUVs where the tow eye is hidden ...

This two-part door card clip is very common on Volvo cars. The clip is used to attach the front or rear door trim card into place.

These black brackets can be used to mount trim panels onto vehicle bodywork and keep the fixings hidden.

These small black plastic trim clips are used on the VW T5 and T6 to attach the surround to the sliding door interior handle. There are two clips u...

These arrowhead plastic clips are used to secure rubber seal in position. There are commonly used on the windscreen cowl and some door seals.

A push fit plastic clip that is used to secure the weatherstrip in position on some older Audi vehicles.

A common fir tree clip used by Fiat on their cars and vans. The clip fits into an 8mm hole. A typical use is to hold the wheel arch lining or splas...

These plastic nuts are used by Fiat and Alfa Romeo. They are not threaded but have sprung tabs inside which attach onto a weld stud or threaded bar...

These body screws have a captive washer and are normally used on parts such as underbody shields, wheel arch linings and to fasten body panels into...

Large headed fir tree clips that are used to hold the splash shields or wheel arch linings in place on several Nissan models. The clips have a 35mm...

These black metal screws are the most common size used by Honda to secure wheel arch linings and splashguards. The screws are high quality parts id...

These metal screws are used on some Porsche models for securing the wheel arch linings, mudguards and under body shields into position.

These small edge clips are used on some Ford models to secure the plastic windscreen cowl that covers the wiper motor and linkage at the bottom of ...

This clip is used at the lower end of the windscreen side trim. They are fitted to the Mk1 Volvo V60 and the Mk2 S60.