Produkte

A very common screw / bolt used by BMW to secure parts such as bumpers, undertrays and arch linings.

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...

These small clips push into a 7mm hole and the fin lock the clip in place. They are typically used by Toyota for small, light trim panels such as a...

This nylon cable tie fit into a 6mm hole and can hold a maximum bundle diameter of 45mm.

This is a common fastener used around the dashboard and centre console of many modern VW cars and vans. The screw is an M5 thread.

These distinctive door card clips are used across the VW group including for Porsche. They are used on the Porsche 911 (997) and the Porsche 987 Ca...

Diese Kunststoff-Druckklammern werden bei einigen neueren VW-Fahrzeugen verwendet, darunter dem Transporter T6.1, der ID-Reihe und dem T-Cross. Das...

These black plastic clips are located on the inside of the door cards and are used to position and secure the door card. They are used on most mode...

These angled screw mounts are used to mount door panels on several BMW models.

Small black metal clips which are used to secure the trim strips onto the door cards on some modern Audi cars.

This clip is used on most Audi door cards to help position and mount the panel into position. Most door cards just use a single one of these clips ...

These black plastic fasteners are used to help position and mount the door cards on most Cupra cars. Each door card typically uses a single clip.

A black plastic fastener used for positioning and mounting the door card on some modern Skoda cars.

These black plastic fasteners are used to help position and mount the door cards on most modern Volkswagen cars. Most door cards just use a single ...

These small black metal clips are used to secure trim strips to the door cards on several VW models.

These black metal screws are used to attach the engine undertray to most modern Kia vehicles. The screws are heavy duty and unlikely to break but t...

Black metal screws used on many different Hyundai vehicles to secure the engine undertray in position.

These small screws have a soft plastic sealing washer pre-fitted. The screws are used for securing exterior trim such as door mouldings, sill cover...

This two-part clip is used on some Lexus models including the IS. The clip is used to attach the windscreen cowl to the vehicle.

These clips have a rectangular collar and are used on many different VAG vehicles to attach and secure the exterior pillar cover trims.

A rectangular collared, screw fit clip used to attach and secure the exterior pillar cover trims.

This rectangular collared clip is often used by VW to attach the trim covers to the B-pillars. The clip is used on many different modern VW cars.

These black plastic screw fit clips are used on the exterior B-pillar covers. The clip has a rectangular head and when the centre pin is inserted, ...

Black plastic fir tree button clip with a 26.0mm head diameter, 11.7mm length and designed to fit an 8.5mm hole. The fir tree shank compresses on i...

These long fir tree clips are used by Citroen to secure parts including bumpers and grilles.

Black plastic fir tree clips designed to fit into a 4.5mm hole. The fir tree profile compresses on insertion and expands to grip the panel, securin...

These small fir tree clips are used on some older Mitsubishi models typically around the windscreen cowl, scuttle panel and air intakes.

Black plastic fir tree clip with an 18.0mm head diameter, 23.2mm length, designed to fit a 6.0mm hole. Equivalent to Mitsubishi MB189333.Fitment ex...

These fir tree clips fit perfectly in Land Rover Defender headlinings. If the headlining is recovered or insulated and you need longer clips, these...

These small, black fir tree clips fit into a 7mm hole. They are used for interior and exterior trim and also for shield and covers within the engin...

This black plastic fir tree clip is an aftermarket equivalent to OE part number BYD 1417776200. Fir tree clips are pushed directly into a pre-drill...

These small fir tree clips are used on some Ford Transit Custom and Connect to secure part of the mechanism on the sliding door rail.

Black plastic fixing clamp used to secure underbody insulation shields in place. Equivalent to Audi part number WHT003386.Fitment examples include ...

Black plastic fixing clamp used to secure underbody insulation shields. Equivalent to Cupra part number WHT003386.Fitment examples include underbod...

These are the clips that fit onto the floor mats and are used to secure the mats into position. The clips are placed

This is a two-part black plastic clip used to secure floor mats to the floor mat holder mounting points within the vehicle cabin. These are the fas...

These metal clips are used on the inside door pull handle to attach the trim cover. They are used on most modern VW cars.

These clips are used on many modern Volvo cars to secure the lower front bumper.